SmartScope SP

Benefits of device

3D Multisensor measuring system
Measuring all types of parts made of a variety of materials
Optimized for scanning with laser or touch probe
Accurate and high performance measuring
The software enable work with 3D model
Working range up to 800 x 820 mm

Download Datasheet

Description

SmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. Most performance specifications for SP models are according to ISO 10360 standards.

SmartScope SP optics combine a wide field objective lens, digital zoom, and 5 megapixel monochrome digital camera, providing a distortion-free 16 mm diagonal field of view at low zoom, with high resolution at high zoom. Careful design of both optics and illumination sources ensure accurate imaging at all zoom levels.

SmartScope SP systems are available in a range of XYZ machine travels. The SP25M scanning probe is included as standard with all SmartScope SP models. The optional TeleStar Plus laser offers very long working distance with sub-micron resolution. The on-axis and through-the-lens design allows laser measurement over the full measuring range of the system.

Technical specifications

SMARTSCOPE SP	250	300	450	635	800
XY Machine Range [mm]	250 (300) x 150	300 x 300	400 x 450 (610)	635 x 635	800 x 820
Z Machine Range [mm]	200	200 (300)	200 (300)	200	200 (300)
Accuracy XY[µm]	1,8+6L/1000	1,5+5L/1000	1,8+4L/1000	2,5+5L/1000	2,0+5L/1000
Accuracy Z (optical measurement) [µm]	2,5+5L/1000	2,5+5L/1000	2,0+5L/1000	2,0+5L/1000	2,0+5L/1000
Weight [kg]	165	750	1040	1310	2665
Maximum workpiece weight[kg]	25	30	50	50	75
Optional touch sensors	TP20/200, SP25, FP
Optional laser sensors	TTL, DRS, Rainbow, Telestar

*L is the measured length in millimeters Accuracy depends on the choice of sensor and environment conditions.

Software

ZONE3

Advanced control and evaluation software for working with OGP measuring systems. Software with a modern interface and wide range of implemented functions, including working with a 3D CAD model and with the possibility of operator view, where users with only minimal training can securely launch and run programs.

Manage all types of sensors in the same software program
Automatically generated scanning trajectory to make it easier to create a measuring program
Program optimization based on position on the machine, scan sensor and zoom
ISO and ASME evaluation
Evaluation of advanced elements – screw threads, gears, roughness
Advanced work with variables
Supports all standard CAD model format including PMI

Versions:

Express – contains all characteristics, commonly used scanning tools, basic geometric tolerances, and 2D model support

Prime – contains all Express properties as well as advanced scanning tools, advanced geometric tolerances,conditions and cycles, 3D models, and customizing protocol headers

Pro – contains all Express and Prime properties as well as screw thread and gear assessment, PMI (model which carries data about dimensional geometrical tolerances) support, semiautomatic creation of programs using 3D models

Offline – version for creating programs without a measurement machine Contains all Pro functions

ZONE3 is standard on FUSION, FlexPoint, SmartScope Flash & CNC, SmartScope Vantage, Smartscope SP, Smartscope ZIP, Lazer and available on SNAP.