SmartScope® Vantage systems are designed to provide the best performance and the highest accuracy in three-dimensional multisensor measurement. The patented TeleStar® 10:1 zoom lens is completely telecentric and automatically calibrated throughout the zoom range, for distortion-free, high fidelity images. Generous working distances make it easy to measure large parts. Multiple illumination sources, including substage profile light, coaxial surface light, and the SmartRing™ green LED oblique illuminator are standard on all Vantage systems.
The combination of sensor tools offered by SmartScope Vantage allows complete measurement of complex parts in a single setup to handle the toughest measurement challenges.
|XY Machine Range [mm]||300 x 150||300 x 300||450 x 450||610 x 660||790 x 815|
|Z Machine Range [mm]||200||250||250||400||300|
|Accuracy XY [µm]||1,8+4L/1000||1,5+5L/1000||1,5+4L/1000||1,5+4L/1000||1,5+4L/1000|
|Accuracy Z (optical measurement) [µm]||2,5+5L/1000||2,5+5L/1000||2,5+5L/1000||2,5+5L/1000||2,5+5L/1000|
|Maximum workpiece weight [kg]||25||30||75||100||75|
|Optional touch sensors||TP20/200, SP25, FP|
|Optional laser sensors||TTL, DRS, Rainbow, Telestar|
*L is the measured length in millimeters Accuracy depends on the choice of sensor and environment conditions.
Advanced control and evaluation software for working with OGP measuring systems. Software with a modern interface and wide range of implemented functions, including working with a 3D CAD model and with the possibility of operator view, where users with only minimal training can securely launch and run programs.
Express – contains all characteristics, commonly used scanning tools, basic geometric tolerances, and 2D model support
Prime – contains all Express properties as well as advanced scanning tools, advanced geometric tolerances,conditions and cycles, 3D models, and customizing protocol headers
Pro – contains all Express and Prime properties as well as screw thread and gear assessment, PMI (model which carries data about dimensional geometrical tolerances) support, semiautomatic creation of programs using 3D models
Offline – version for creating programs without a measurement machine Contains all Pro functions